10
ENGLISH
Hyper-PRO top AX series User manual
Balanced use of XLR connectors
1= Ground/Shield
2= Hot (+)
3= Cold (-)
INPUT
OUTPUT
In case of unbalanced use Pins 1 and 3 will be jumped
Unbalanced use of 1/4” jack TS connector
Strain relief
clamp
Sleeve
Tip
Sleeve
Ground shield
Tip
Signal
Balanced use of 1/4” jack TRS connector
Headphones connection with 1/4” TRS connector
Strain relief
clamp
Sleeve
Tip
Sleeve
Ground shield
Ring
Ring
Cold (- Ve)
Tip
Hot (+ Ve)
6. FIXED INSTALLATION
The installation of HYPER-PRO TOP AX speakers has to be built and constructed in a
way that it can hold 10 times the weight for 1 hour without any harming demolition.
The installation must always be secured with a secondary safety attachment (e.g. an
appropriate catch net). This secondary safety attachment must be constructed in a way
that no part of the installation can fall down if the main attachment fails.
When rigging, de-rigging or servicing the unit, staying in the area below the installation
place, on bridges, under high working places and other endangered areas is forbidden.
The operator has to make sure that the safety measure and the unit’s technical instal-
lation is approved by an expert before taking into operation for the first time and after
