6
FILE GENERATOR WINDOWS PROGRAM
The Windows program SRFileGen.exe is used to select settings and sounds and create a .srf
file. The file should be transferred to a MicroSD memory card.
SoundRacer X can then read the .srf files sounds and settings from the MicroSD card into the
processor.
Content of MicroSD card
The MicroSD card delivered with SoundRacer X contains Windows program, sound files and
documentation.
The .srf files are generated files with standard settings. Copy all files and folders to a
computer to read the manuals and as backup.
There are two versions of file generator programs on the card. In each of the seven sound
folders there are four wav sound files and the original SRFileGen.exe.
On the card there is also a new SRFileGen.exe with the SR shield in front of the file name.
This program makes it easier to set the parameters but is not fully tested in this version so
that is why the original program is still included. We appreciate reports about the program,
you can use the form on this page
https://www.soundracer.se/?p=102
Generating an output.srf file from wav sound files:
Original SRFileGen
The SRFileGen.exe must be in the same folder as the four files idle.wav, onlow.wav, onhigh.wav and
offlow.wav.
It is convenient to name the folder with the name of the sound.
