GettInG Started
Step 3: LINKING
The iConnect dock and receiver usually link automatically once
you
’
ve docked your iPod and plugged in the receiver. A solid blue
LED on the dock and the receiver indicates that the two pieces are
linked.
If you get a blinking blue LED on the dock and/or receiver, try the
following steps to link the two manually:
1
Take the iConnect dock and iPod next to the receiver
—
keep the
dock and iPod connected.
2
Find the LINK buttons on the back panel of the receiver and on the
side of the dock.
iConnect dock, side view
3. Press and hold the LINK buttons on the receiver and dock for
5 seconds. The blue LEDs on each blink while the two pieces
are linking. These LEDs stay solid blue when the two have
linked.
Now you
’
re ready to enjoy music from your iPod over your home
stereo with no wires attached! Just use your iPod like you normally
would to select songs, playlists, etc. And enjoy!
Summary of Contents for iConnect
Page 1: ...Solus Series iConnect USER MANUAL iConnect ...
Page 2: ......