NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
Improper use or installation may void warranty coverage.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com/tech-services/returns/
.
If you have questions regarding this product, contact
Technical Services
, Monday - Friday, 8 a.m. to 5 p.m. ET at
1.800.338.7337
(press #4).
Questions or comments that do not require immediate attention may be emailed to
ENHANCING SAFETY THROUGH INNOVATION
EPL7PD(x)C_EPL7000 0121
1.800.338.7337 / www.soundoffsignal.com
REPLACEMENT PARTS & ACCESSORIES
PMB3BKT- Replacement Permanent Mount Bracket (each)
PMB3BRKT- Replacement Permanent Mount Bracket (kit)
PMB3TDC- EPL7000 Replacement Clear Dome
TECHNICAL SPECIFICATIONS
Overall Dimensions:
14.25”L x 8.27”W x 2.93”H
Flash Patterns:
29 flash patterns
Input Voltage Range:
10 - 16 Vdc
Current Consumption:
2 Amps (Avg) - 4 Amps (Max)
# of LEDs:
24 Generation 3 LEDs
Operating Temperature:
-40º to +65º C
Cord Length:
125.75”
Flash Patterns
Number/Name
Modules Affected
1. Warp
Alternating
2. Quad
“
3. Quad2
“
4. Quint
“
5. Double2
“
6. Warp 1, 2, 3
“
7. Progressive
“
8. Q-Switch™
“
9. Intercycle
“
10. Warp
Whole Bar
11. Quad
“
12. Quad2
“
13. Quint
“
14. Double2
“
15. Warp 1, 2, 3
“
16. Progressive
“
17. Warp
Diagonal
18. Quad
“
19. Quad2
“
20. Quint
“
21. Double2
“
22. Warp 1, 2, 3
“
23. Progressive
“
24. Q-Switch
“
25. Intercycle
“
26. Rotator
“
27. Cycle 1
Random
28. Cycle 2
“
29. Cruise
Whole Bar
ELECTRICAL:
PATTERN CHANGE
While the lightbar is operational, touch the
WHITE WIRE to 10-16Vdc and hold for longer
than 1.5 seconds. All light engines will steady
burn, turn off, and then start flashing the next
pattern on the list. Release the WHITE WIRE
after the bar resumes flashing. If multiple
pattern changes are required, the power must
be cycled after every change.
The
PINNACLE Mini Lightbar features non-
volatile memory and will recall last pattern
used.
Selected pattern will remain the default once
turned off and can be changed by changing the
flash pattern before powering off.
ACTIVATE/DEACTIVATE CRUISE
While the lightbar is operational, touch the
WHITE WIRE to 10-16Vdc for less than one
second. The lightbar will enter cruise mode.
The lightbar will remain in cruise mode unless
power is cycled or the WHITE WIRE is touched
to 10-16vDC for less than one second again.
FOLLOW DIAGRAM BELOW FOR ELECTRICAL CONNECTIONS
RED WIRE: Connect through a switch and fuse to 10-16Vdc
BLACK WIRE: Connect to a good reliable ground (-)
WHITE WIRE: Momentary, connect to 12V (+)
EPL7000 MINI LIGHTBAR PERMANENT MOUNT
RED
BLACK
WHITE
5 AMP FUSE
+12 Vdc
PINNACLE
LIGHTBAR
