ETSS100NBKTH 0120
2
2017 CHEVROLET TAHOE SPEAKER BRACKET
ETSS100NBKTH (for 2017-2020 model years only)
NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
Improper use or installation may void warranty coverage.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com/tech-services/returns/
.
If you have questions regarding this product, contact
Technical Services
, Monday - Friday, 8 a.m. to 5 p.m. ET at
1.800.338.7337
(press #4).
Questions or comments that do not require immediate attention may be emailed to
ENHANCING SAFETY THROUGH INNOVATION
FIG. 3
1.800.338.7337 / www.soundoffsignal.com
INSTALLATION (cont.):
3. Remove the two bottom, middle louver screws (See
Figure 3.)
4. Hang bracket, seating screws so they are started.
Tighten screws at bottom then tighten screws at
top (See Figure 4.)
5. Wire speaker to siren output and test.
6.
Re-install front bumper cover assembly using
previously removed hardware.
FIG. 4
TECHNICAL SPECIFICATIONS
Material:
Steel with powder coated black
finish
Dimensions
(bracket only):
17.70”H x 11.92”W x 3.13”D
HARDWARE
QTY
COMPONENT
1
SPEAKER BRACKET, LH
1
SPEAKER BRACKET, RH
1
BRACKET, CAMERA INNER TUB
4
18-8 STAINLESS STEEL HEX
HEAD SCREW
4
18-8 STAINLESS STEEL
OVERSIZED WASH
4
ZINC-PLATED STEEL SPLIT LOCK
WASHER
2
FLATWASHER SS 1/4" (5/8" OD)
2
M6 HEX HD 18-8 SS 30MM L