MICROPHONE BRACKET INSTALLATION:
A metal clip is provided for mounting the microphone. Choose a loca-
tion convenient to the operator and away from any air bag deploy-
ment areas. Using the mounting clip as a template, mark the two
holes to be drilled. Using a 1/8” drill bit, drill the two mounting holes.
Install the two #6 screws provided with the bracket.
: Microphone
PSRNMC02
: Control Panel
PSRNCTRL1
: Amplifier Filter
PSRNFLT1
Replacement Parts & Accessories:
STANDBY
SPKR 1 INDICATOR
SPKR 2 INDICATOR
CONDITION
FLASHING
ON
ON
OVER-TEMPERATURE
FLASHING
OFF
ON
UNDER-VOLTAGE
FLASHING
ON
OFF
OVER-VOLTAGE
FLASHING
FLASHING
-
COMM FAULT - RELAY
FLASHING
-
FLASHING
COMM FAULT - AMP
FLASHING
FLASHING
FLASHING
COMM FAULT -RELAY AND AMP
OFF
-
-
STANDBY MODE
ON
ON
-
SPKR 1 IS ACTIVE
ON
-
ON
SPKR 2 IS ACTIVE
ON
FLASHING
-
SPKR 1 FAULT
ON
OFF
-
SPKR 1 IS NON-FUNCTIONING
ON
-
OFF
SPKR 2 IS NON-FUNCTIONING
SIREN AMPLIFIER DIAGNOSTIC
INDICATORS:
380 SERIES REMOTE SIREN
ETSA380R
LED INDICATOR
CONDITION
OFF
RELAY OUTPUT IS OFF
ON
RELAY OUTPUT IS ON
FLASHING
RELAY OUTPUT HAS A FAULT
AUXILLARY AND SLIDE SWITCH LED
INDICATORS:
ETSA380R 4.12
TECHNICAL SPECIFICATIONS
Overall Dimensions:
Control Panel:
Amplifier/Relay:
6.89”H x 3.51”W x 1.17”D
8.67”H x 5.66”W x 2.66”D
Input Voltage:
10 - 30Vdc (negative ground)
Input Current:
9 Amps @ 13.5 VDC (100W
Speaker)/18 Amps @ 13.5Vdc
(200W Speaker)
Standby Current:
Ignition ON:
Ignition OFF:
500mA
<20mA
Audio Frequency
:
200Hz - 10 kHz + 3db
Output Power
:
2x100W RMS MAX. (11 Ohm
Speaker Impedance)
Siren Frequency
:
675Hz - 1633Hz
High Voltage
Protection:
Limits to 32V in Maximum
Low Voltage Shutdown:
Voltage <9.0V will cause siren
output to cease and will resume
when system voltage is >9.0V
Operating Temperature:
-40°C to +50°C
Auxiliary Input connection for remote
manual or Hands Free operation
Tone disable for California Title 13
compliance
Boxed Weight:
8 lbs
