Instruction Manual
4
• You can connect the audio output of an
external device to this unit, to listen to the
audio
playback
of that device through the speaker.
• To connect an external audio device,
please use
an
AUX
audio cable with 3.5mm-
to-3.5 mm plugs to connect the headphone
out or audio line-out of the external device to
the AUX input of this unit.
•
T
he AUX mode
will be selected
automatically
.
• Turn on the external device. You can
•
Wireless audio streaming requires pairing
of a Bluetooth device (e.g. smartphone).
HOW TO PAIR YOUR DEVICE TO
THIS UNIT:
•
Make sure the Bluetooth function is
switched on in your device (e.g. smartphone,
tablet).
•
Switch on the unit and press the
M
button repeatedly to select the
Bluetooth mode (selected by default).
•
Once the Bluetooth pairing indicator
begins flashing, you will find the unit listed in
the Bluetooth connections list of your device
(as
SM
-PS
5081
B).
•
If asked for a passcode, enter “0000”.
•
The initial setup is required only once
per device. The unit will automatically pair to
the last paired device.
•
The LED indicator will flash when
searching for a Bluetooth device and stay
on when the devices are paired.
•
When playing files, you can press
the
Play/Pause button to pause and resume
playback.
•
Press
and hold
the
-
or
+
button to
go to a previous or next track.
Shortly
p
ress these buttons to decrease or
increase volume, respectively.
External device connection
USB operation
press
t
he
-
and
+
to
adjust the volume
level
.
Slight noise during playback pauses
is not a construction defect, it is
determined by the factory presets of the
dynamic noise reduction system.
Playback
Turn on the device.
• Insert a USB drive into the USB port.
The playback mode will be
selected automatically
.
• When playing, you can press
Play/Pause
to play/pause the playback.
• During the playback you can press and
•
hold the
-
or
+
button to go to a previous or
next track. Shortly press these buttons to
decrease or increase volume, respectively
.
It may take up to 60 seconds to open
and verify a large USB drive with many
files.
General USB notes
•
This unit is equipped with a USB port
that can read and play
MP3, WAV, WMA,
FLAC, AMR
files stored on standard USB
drives up to 32 GB.
•
FAT and FAT32 file system is supported
by
this unit.
Never remove USB drives from the unit
during playback, always stop playback,
then press the
M
button to switch to another
mode before removing the storage to
prevent damage to your files and drives
themselves.
TWS function
•
If you have two units at your
disposal, you can pair them to each other
and enable the True Wireless (TWS)
stereo sound
.
•
Turn the both units on and
sw
i
tch them
in
to the Bluetooth mode. Press
the TWS button
o
n
a
n
y of the u
ni
ts.
Make
sure the other unit is not paired to any
bluetooth devices.
The TWS button will
light up
,
in
d
i
cat
in
g that the u
ni
t
s
are paired
successfully.
TWS works o
n
ly
in
Bluetooth mode
and only in featured models
.
