SoundMax SM-LCD912, Instruction Manual

Page: 6 / 17

6
Installation/connection
Stand installation:
Release the metal washer on the top of the bracket but do not separate it
from the bracket.
Insert the metal washer with the bracket into a hollow at the back of the
unit and move the bracket up to a suitable height.
Tighten the screw 1 up on the bracket to fix the stand with the unit.
Control the screen angle with the lateral screw.
Screw the stand to the bracket.
Connection of the antenna:
Plug the antenna into the Antenna jack situated on the rear panel of the unit.
Connection of headphone:
Connect the headphone to the headphone jack for private listening. The
speakers will not operate when headphones are connected.
Connection to power source:
Connect one round end of attached AC/DC adaptor or car adaptor to the power
source input jack and the other end to the wall outlet at the suitable voltage.
When in house, use the AC/DC adaptor; for car use, connect with the car
adaptor (adaptors included should be only used). Press POWER button to turn
on the unit.
AV input connection
Connect the AV cable as showed in the
picture below. After connection, switch the
unit to the AV mode.