SoundMax SM-CSL502, Instruction Manual

Page: 5 / 16

5
If unit fails to operate properly
Carefully read the instruction to make sure the unit is being operated properly. Check the following before you
take your unit to the local dealer for repair.
Symptom Poss ible cause Solution
No sound The volume control regulator set in the
minimal position
Adjust sound level
Bad power connections Check to see that all the power and speaker
leads are securely connected
The audio cassette receiver is damaged Take your unit to the local dealer for repair
Unnatural
sound
Acoustic system cables are connected
without observance of polarity (+ or -)
Check to see that all the power and speaker
leads are securely connected
Damage speaker wire or speaker Replace the speaker or speaker wires
The audio cassette receiver is damaged Take your unit to the local dealer for repair
Note : Good ground connections eliminate most electrical noise problems and require tight contact with the
metal vehicle chassis. Remove plastics, paint or rust for good electrical contact.
Specification
Loudspeaker сone woofer: polypropylene cone
tweeter: 30 mm neodymium mylar dome tweeter
Magnet ferrite 5.4 Oz (153 g)
Peak output power 180 W
Rated output power 70 W
Impedance 4 Оhm
Sensitivity 90 dB
Frequency response 70 – 21000 Hz
Dimensions 138.5 х 49 mm
Net weight 0.38 kg