SoundMax SM-CSA402 Instruction Manual Download Page 3

3

Important safeguards

 

The owner s manual contains important operating and maintenance instructions for your safety. It is

necessary to refer the manual.

 

Do not install the speakers where they may be subjected to excessive heat moisture, dust or where they
will be kicked repeatedly, brushed or bumped.

 

Before mounting and connecting the wires be sure that wire of the negative pole terminal is disconnected

from accumulator. Nonobservance of this demand may cause the short circuit or fire.

 

To prevent short circuit never put or leave any metal objects (e.g. coins or metal tools) inside the
acoustic system.

 

Make absolutely sure that the terminals for the speakers are connected to the proper outputs from the

music source.

 

Never run the wiring on the outside of the vehicle or under it where it can be damaged by road hazards or
the moving parts of the vehicle. Use existing wire channels, sills, panels and molding strips inside the
vehicle to hide the wiring for safety and a neat appliance.

 

Make sure the wire of the negative pole terminal is disconnected from accumulator while connecting the

speaker terminals. Turn on the various components and slowly advance the volume. Remember to check
and re-check all connections to insure proper installation and use.

 

Do not continuously use the speaker system beyond the nominal power handling capacity.

 

Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker

system to protect them from damage caused by the magnets in the speakers.

 

If you cannot find the appropriate mounting location, consult your car dealer or your nearest dealer
before mounting.

CAUTION

: Take extreme caution when working near the gas tank, gas lines, brake or hydraulic lines and

electrical  wiring.

Summary of Contents for SM-CSA402














Reviews: