SoundMax SM-CMD5001, Instruction Manual, Page: 13 / 71

13
General operations
Touch screen
Due to the touch screen, you can fulfill most functions not only by pressing buttons but also by touching the
options you need.
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press RES
button on the unit with a pointed object (such as a ballpoint pen) to set the unit to initial state.
Note: When some errors occur on the display, you can also press RES button to resume to normal, and it
will erase the clock setting and some memorized functions.
Turning the unit on/off
Press PWR/SOURCE button on the RC or PWR/SRC button on the panel to turn on the unit. Press and hold
the button more than 2 seconds to turn off the unit.
Open the monitor
Press REL button on the unit or EJECT button on the RC to slant the monitor. Press the button again, the
monitor will return to the previous state.
Angle setting
You can adjust the desired angle of the monitor. Press and hold REL button till ANGLE appears on the
display. Press BAND/+ button to adjust monitor backward by definite angle; press MUTE/- button to adjust
the monitor forward.
Note: Please do not adjust the monitor tilt manually, otherwise it can get damaged.
Night mode
Press and hold MUTE/- button to enter the night mode of the display; press it again to switch to the normal
mode.