SoundMax SM-CMD3016, Instruction Manual, Page: 26 / 64

26
System setup
Press SETUP button on the RC or 6/SET/PAU button on the panel to display setup screen, use UP/DOWN cursor
buttons to select the desired setup page: System, Disc. Press RIGHT cursor button to go to the selected page
item list. In the selected page select an item using UP/DOWN cursor buttons, then press ENTER button on the
RC or 5/STOP/ENTER button on the panel to go to setting list. Use UP/DOWN cursor buttons to select the
needed setting. Press ENTER button on the RC or 5/STOP/ENTER button on the panel to confirm your selection.
Press SETUP button on the RC or 6/SET/PAU button on the panel to go the previous menu page.
System setup
NTSC/PAL: Select the TV system in the setting menu (NTSC, PAL, PAL-60,
AUTO).
Adjust: Adjust brightness, contrast, hue, saturation and sharpness of the
image.
TV Ratio: Select TV type to watch wide screen movies.
4:3 PS: For 4:3 TV, left and right edges will be cut.
4:3 LB: For 4:3 TV, black bars will appear on top and bottom.
16:9 Wide: For 16:9 wide screen TV.
Disc setup
OSD language: Select the language to be used for the on-screen display.
Audio language: Select the language to be used for the audio. You can select a
preferred audio from those included on the DVD video disk.
Subtitle language: Select the language to be used for subtitles. You can select
a preferred subtitle from those included in the DVD Video disk.
Password: Change the password. The initial factory password is 0000. You can
set your own password. If you forget your own password, you can use 0000 as
general password.
Rating: The control level is for parents to control content and protect children
from violence and erotic. The disc, the level of which is higher than the setting
level can not be played. The rating can be selected only under the password
unlocked status, and the limits can work only under password locked status.