SoundMax SM-CMD2020, Instruction Manual

Page: 19 / 81

19
Digital tuner
Choose Radio Band
Press the MODE Button to access the radio function. The unit comes with five bands- three FM Bands (FM1, FM2,
and FM3) and two AM Bands (MW1, and MW2). Each of the five bands can store up to six preset stations, for a total
of 30 preset memory stations.
Radio Tune / Seek Function
In Radio Mode, press right tuning knob (Seek +/- Button) to manually adjust the radio frequency. Turn it clockwise
for manual seek +, and anti-clockwise for manual seek -.
Turn and hold the Seek +/- button for more than 1 second, the radio will seek to the next up or down strong and
clear frequency station. Repeat this action to seek for other desired stations.
Mono/Stereo Reception Control
In FM radio mode, press the MON/ ST button to select stereo or mono reception. ST ON will show on the display
indicating that stereo reception is received. Improvement of reception of distant stations can be done by selecting
MO/ST operation which may cut down some reception noise.
Local/Distance Control
In radio mode, press the LOC button to select local or distance reception.
a. LOC ON showing on the display, means local reception is turned on;
b. _DX_ showing on the display, means distant reception is turned on.
Local and distance reception setting can facilitate the radio reception, depending on the location in which the radio
is being used.
Save Your Preset Stations
There are six numbered preset buttons which can store and recall stations for each band. While listening to a radio
station you would like to save as a pre-set, press and hold one of the buttons numbered 1-6 until you hear a beep.
The button you pressed is now the pre-set button for that station.