SoundMax SM-CDM1051, Instruction Manual

Page: 6 / 47

6
1. Unit
2. Sleeve
3. Dash board
4. Hex nut
5. Lock washer
6. Plain washer
7. Car body
8. Metal strap
9. Tapping screw
10. M5X15 hex bolt
Use the metal strap to fix the rear side of
the unit. Determine a place for fixing and
install the strap as shown in the picture.
You can bend the strap to the needed angle with your hands.
Make the necessary wire connections. Ensure the connections are correct.
Install the unit into the sleeve until the side locks are fixed.
Dismantling the unit
– Trim frame
– Frame uninstall direction
– Release key insertion
1. Switch off the unit and detach the front panel.
2. Insert your fingers into the groove in the front side of the trim frame (apply
some effort to detach the frame). Pull the frame to detach it.
3. Insert the supplied release keys into the both sides of the unit body to click, as
shown in the picture. To extract the unit from the dashboard, pull the release
keys or the unit body to pull it out. Before detaching the unit, ensure it is not
fixed with the metal strap.