SoundMax SM-CCR3703G, Instruction Manual, Page: 14 / 53

14
• Balance: Press SEL Button on the RC until the display shows “BAL”, then use the VOL +/- Button to adjust
the balance between the left & right speakers.
• Fader: Press SEL Button on the RC until the display shows “FAD”, then use the VOL +/- Button to adjust the
balance between the front & rear speakers.
• Other Audio Settings: You can adjust other audio settings like preset equalizer, loudness or subwoofer
ON/OFF by tapping the “EQ” icon on the main menu, or on the control menu of other audio/video play modes.
Mute function
Press MUTE button on the RC to turn off the sound. Press the button again or adjust volume to resume the
sound output.
Mode selection
Press the MODE Button to cycle the Play Modes between RADIO, BT (Bluetooth), USB, SD and AUX in.
RCA output
The RCA Output is on the back of the unit. (Refer to Wiring Diagram) This output is for connecting amplifier,
equalizer, or other audio component that requires a pre-amp out connection. (Red=Right, White=Left) Follow
the manufactures instructions for the audio component that you are connecting.
AV in jack
The Video Output Jack is on the back of the unit. (Refer to Wiring Diagram) This output (in yellow) is for
connecting monitor(s). You must connect a monitor for car in order to play this unit in another monitor. Consult
your dealer for any kinds of monitors that are suitable to use in car.