SoundMax SM-CCR3064F, Instruction Manual

Page: 6 / 34

Installation/Connection
General notes
• Choose the mounting location where the unit will not interfere with the normal driving function
of the driver.
• Before finally installing the unit, connect the wiring and make sure that the unit works properly.
• Consult with your nearest dealer if installation requires the drilling of holes or other modifications of
the vehicle.
• Install the unit where it does not get in the driver's way and cannot injure the passenger if
there is a sudden stop, like an emergency stop.
• Avoid installing the unit where it would be subject to high temperature, such as from direct
sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive
vibration.
•
•
•
•
Install the sleeve into the dashboard; ensure it is installed
with the correct side and there are no obstacles (wires,
dashboard elements, etc) for the unit installation.
After installing the sleeve into the dashboard, bend tabs fitting
to the size of the dashboard to fix the sleeve in place.
Make the necessary wire connections. Ensure the connections
are correct.
Install the unit into the sleeve until the side locks are fixed .
1. Dash board
2. Sleeve tab to bend
5