SoundMax SM-CCR3050F, Instruction Manual, Page: 10 / 31

10
General operations
Turning the unit on/off
Press the PWR button to turn the unit on. Press and hold the button again to turn the unit off.
Reset the unit
When first using the device or after replacing the car battery, you must reset the unit. Press the RESET
button (hole) with a pointed object (such as a ballpoint pen) to set the unit to its initial state.
When some errors occur, you can also press the RESET button to return to factory settings, but note that
it will erase clock setting and some memorized functions.
Mode selection
Press the PWR/MOD button repeatedly to select between Radio, AUX, USB or Memory Card modes.
Operation modes are indicated on the display. Memory card and USB modes are not available unless a
memory card or a USB device is connected.
Volume control
Adjust the volume by rotating the VOLUME knob.
Audio parameter setting
Press and hold the SEL/ENT/VOL knob repeatedly to select a parameter: BAS (bass) => TRE (treble) =>
BAL (balance) => FAD (fader) => LOUD ON/OFF => EQ (equalizer) => DX(distance)/LOC(local) => STEREO
=> VOL(volume). Rotate SEL/ENT/VOL knob to adjust each mode.
• эassкTrebleх from
-7 to +7;
• эalanceх
-10 (left) to +10 (right);
• Faderх from
-10 (rear) to +10 (front).