SoundMax SM-CCR3041, Instruction Manual

Page: 9 / 40

9
Using the ISO Connector
1. If your car is equipped with the ISO connector, then connect the ISO
connectors as illustrated.
2. For connections without the ISO connectors, check the wiring in the
vehicle carefully before connecting, incorrect connection may cause
serious damage to this unit.
Cut the connector, connect the colored leads of the power cord to the car
battery as shown in the colour code table below for speaker and power cable
connections.
Location FUNCTION
Connector A Connector B
1 - Rear Right(+)---Purple
2 - Rear Right(-)---Purple/Black
3 - Front Right(+)---Grey
4 Battery 12V (+)/yellow Front Right(-)---Grey/Black
5 Auto Antenna/blue-white Front Left(+)---White
6 - Front Left((-)---White/Black
7 Ignition/red Rear Left(+)---Green
8 Ground/black Rear Left(-)---Green/Black
Auto antenna wire is intended for power supply of the antenna and for remote control of an
additional amplifier.