5
Recording
RECORDING FROM RADIO
·
Slide the Function switch to RADIO position.
·
Tune to the desired station by turning the Tuning control regulator.
·
Insert a blank cassette into cassette compartment with the tape side upward.
·
Press the PLAY button and RECORD button simultaneously to start recording.
·
Press the STOP/EJECT button when finished.
NOTE:
You may want to monitor playback during recording. You can adjust the sound with the VOLUME control. This
adjustment does not affect the content of recording.
Special features
AUTOSTOP
·
During playback or recording, the unit will shut itself off automatically at the end of tape.
Maintenance and care
·
Check your batteries regularly, old or discharged batteries should be replaced. If the unit is not going to
be used for some time or is being run exclusively on the alternative power, remove the batteries to avoid
leakage and damage.
·
Electronic products of this kind should never be subjected to moisture or extreme temperatures.
·
If necessary, clean the unit with a piece of cloth dampened with water only (be sure the AC power cord is
disconnected from the power supply).
·
The heads and capstan are in constant contact with the moving tape. Use a small cotton bud with alcohol
or special tape head cleaner to clean these parts. Never touch the heads with anything metallic.
ERASE PROTECTION
·
To prevent accidental erasing of a cassette, simply break off the two plastic tabs located on the cassette
tape s rear side.
·
When a cassette with removed plastic tabs is inserted, the recording button cannot be pressed.
·
If a cassette is to be erased and re-recorded at a later stage, simply cover the holes on the cassette where
the tabs were removed, with a piece of strong adhesive tape.
