SoundMax SM-2407, Instruction Manual

Page: 5 / 15

5
Press PREVIOUS/DOWN button once to skip back to the beginning of the previous track. Press and hold
this button to search for a particular point at high speed backward. Release the button to resume
normal play.
Press button to play every 10th track on disc. If your disc contains folders, press and hold
this button to select the next folder.
Playback modes
Press MODE button repeatedly to switch between different playback modes.
During playing the mode will change as below:
-
For CD playback: Repeat current track => Repeat all tracks => Normal playback.
-
For MP3/WMA playback: Repeat current track => Repeat current folder => Repeat all tracks =>
Normal playback.
Program mode
Up to 99 MP3 tracks or 20 CD tracks can be programmed for disc play in any order.
Before use, be sure to stop the disc by pressing STOP button.
Press MODE button. The set is now in memory programming mode, at the first memory position.
“PROGRAM” will be blinking on the display.
Select a desired track by using NEXT/UP and PREVIOUS/DOWN buttons.
Press MODE button. The set will advance to next memory position.
Repeat the 2 last steps described above to enter additional memories into the program if necessary.
After a maximum of 99 MP3 tracks or 20 CD tracks (or less) have been selected as described above, press
PLAY/PAUSE button to start playing the programmed tracks. “PROGRAM” will be shown on the display.
Use NEXT/UP and PREVIOUS/DOWN buttons to skip to the previous or next programmed track. The
program memory will be cleared when you press STOP button or turn off the CD-player or power supply.
Note: Good quality sound is guaranteed only when playing licensed discs.
USB/SD/MMC operation
This unit is equipped with a USB socket compatible with USB drives of 1.1 and 2.0 versions up to 8 Gbs.
The unit also can play files contained in SD/MMC memory cards up to 8 Gbs.
Remove the disc from the disc compartment and close the compartment door. Insert a USB or an
SD/MMC card into the corresponding slot. Set the function switch to CD/MP3/USB position.