6
The program memory will be cleared when you press STOP/MEDIA SELECT button or turn off the CD-
player or power supply.
Note: Good quality sound is guaranteed only when playing licensed discs.
USB/SD/MMC operation
This unit is equipped with a USB socket compatible with USB drives of 1.1 and 2.0 versions up to 4 Gbs.
The unit also can play files contained in SD/MMC memory cards up to 4 GBs.
Insert a USB or an SD/MMC card into the corresponding slot. Set the function switch to
CD/MP3/USB/SD position.
Press and hold repeatedly STOP/MEDIA SELECT button to select between disc, USB or SD playback. All
the operations with files contained in USB or SD/MMC are the same as disc operations.
Note: Never remove USB or SD/MMC storage from the slot while playback. Always stop playback before
unplugging the storage. Never use a USB extension cable to connect are USB to the unit.
Maintenance and care
Check your batteries regularly; old or discharged batteries should be replaced. If the unit is not going
to be used for some time or is being run exclusively on the alternative power, remove the batteries to
avoid leakage and damage.
Electronic products of this kind should never be subjected to moisture or extreme temperatures.
If necessary, clean the unit with a piece of cloth dampened with water only (be sure the AC power cord
is disconnected from the power supply).
CD protection
When pick up the CD disc, always hold the edge of the disc, never touch the surface of the disc, it would
scratch the disc surface and may occur sound distortion or raise reading problem.
