5
•
Insert a blank cassette with the tape-side up, into the proper Guide-rails on the inside of the cassette
door.
•
Gently push the cassette door forward (inwards) to close it.
•
Make sure the tape is fully and properly inserted before doing so.
•
The set is now ready to start recording, which can be done from either the radio or CD-player.
Recording from radio
•
Set the FUNCTION switch to RADIO position.
•
Tune to the needed station.
•
Press the PLAY button and RECORD button on deck simultaneously to start recording.
•
Press STOP/ EJECT button to end recording.
Recording from CD
•
Set FUNCTION switch to CD position.
•
Press RECORD and PLAY buttons on cassette deck simultaneously to start recording.
•
Press the PAUSE button on deck.
•
Turn on the CD-player and select the exact song to be recorded.
•
Release the PAUSE button on deck to start recording.
•
Press STOP/EJECT button to end recording.
Erase protection
•
To prevent accidental erasing of a cassette, simply break off the two plastic tabs located on the
cassette tape’s rear side.
•
When a cassette with removed plastic tabs is inserted, the recording button cannot
be pressed.
•
If a cassette is to be erased and re-recorded at a later stage, simply cover the holes
on the cassette where the tabs were removed, with a piece of strong adhesive tape.
Summary of Contents for SM-2404
Page 1: ...SM 2404 PORTABLE STEREO RADIO CASSETE RECORDER WITH CD MP3 Instruction manual CD MP3...
Page 10: ...10 6 UM 2 LR14 3 5...
Page 14: ...14 21 CD 99 MP3 CD PLAY PAUSE CD STOP MP3 CD R CD RW MP3 MP3 CD SKIP 10 FOLDER 3...
Page 15: ...15 CD 3 CD CD R CD RW 220 50 1 5 2 FM 64 108 M 530 1600 2 2 2 4 x x 295 x 218 x 148...
