UR600SW / English Instruction Manual
4
Listening to an External Audio Source
1. Connect an audio cable with 3.5mm stereo plug from an auxiliary audio device to the AUX-IN jack of the unit.
2. Press the Power
button to turn on the unit.
3. To select auxiliary audio input, press the FUNC button (or the AUX button from the remote control). The AUX
mode LED indicator displays.
4. Turn on the external auxiliary audio device.
5. The volume can now be controlled through the unit.
6. Operate all other functions on the external device as usual.
Note:
- Press and hold the Power
button from the main unit to turn off the unit when you finish listening. Don't forget
to switch off the power of the external audio device as well.
Preset EQ
The unit is designed for you to select the preset EQ.
When the unit is powered on (in Bluetooth or Aux-In mode), you can select 5 preset EQ as following steps.
To select preset EQ :
Each press of the EQ button will scroll through following selection.
Display Symbol
Meaning
OFF
Normal
bAS
Bass
POP
Pop
rOC
Rock
JAZ
Jazz
CLA
Classic
Clock Setting
Settings
When the unit is OFF (Standby mode):
Set 12/24 Hour format
1. Press and hold the CLOCK button entering 12/24 hour format setting mode, the LED display blinks.
2. Press the TUN
+ / - button to select 12 or 24 hour display format.
Set Clock
3. Press the CLOCK button again and the clock hour digit(s) blink.
4. Press the TUN
+ / - button to set hour.
5. Press the CLOCK button and the clock minute digits blink.
6. Press the TUN
+ / - button to set minute.
Exit setting mode
7. To save all settings, press the CLOCK button or wait for few seconds to exit the setting mode.
