11
Bluetooth Operation
Pair Bluetooth-enabled Device
The first time you connect your bluetooth device to this player, you need to pair your device to this player.
Note:
- The operational range between this player and a Bluetooth device is approximately 8 meters (without
any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth dev
ice to this unit, ensure you know the device’s capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode
automatically.
1 During ON mode, press the
ON/OFF/SOURCE
button repeatedly on the unit or press the
SOURCE
button on the remote control to select Bluetooth mode. “
NO BT
” will show on the dis
play if the unit is
not paired to any Bluetooth device. The system has entered pairing mode.
2 Activate your Bluetooth device and select the search mode. "
UR411S1
” will appear on your Bluetooth
device.
3
Select “
UR411S1
” in the pairing list. Display panel
show
“BLUET”
while the pairing succeeds.
Tips:
-
Enter “0000” for the password if necessary.
- If a connection exist, press and hold "
%)
/
PAIR
" button on remote control or the
%)
on unit for a few
seconds to re-activate the pairing mode, the connection will be interrupted.
- If no other bluetooth device pairs with this player within two minutes, the player will recover its
previous connection.
- The player will also be disconnected when your device is moved beyond the operational range.
- If you want to reconnect your device to this player, place it within the operational range.
- If the device is moved beyond the operational range, when it is brought back, please check if the
device is still connected to the player.
- If the connection is lost, display panel show "NO BT". Follow the instruction above to pair your device
to the player again.
Listen to Music from Bluetooth Device
•
If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen
to the music stored on the device through the player.
•
If the device also supports Audio Video Remote Control Profile (AVRCP) , you can use the player's
remote control to play music stored on the device.
1. Pair your device with the player.
2. Start to play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
-
To pause/resume play, press the
%)
button.
