LOCATION OF CONTROLS
1. Function switch
(ON/OFF/AUTO/BUZZ)
2. Volume knob
3. Power indicator
4. Timeset button
5. Alarmset button
6. LCD display
7. Hour button
8. Minute button
9. Timer button
10. Tuning knob
11. Battery compartment
12. Speaker
13. Hanging plate
Unit power supply (mains 230V/50Hz)
Connect the power cable plug to the (230V) wall outlet.
Ensure main supply is 230V 50Hz otherwise may not work proberly or clock goes wrong
BATTERY BACKUP (batterycompartment 11)
Two AAA/UM-4 batteries 1,5V (not included) may be installed as a backup option to
maintain the time if electrical power fails. In the event of a power outage, the time
will not appear on the clock LCD Display, however the clock will continue to operate
and the actual time will be maintained. The Clock LCD Display and other functions
will resume once electrical power is restored if used the backup battery .The backup
battery should be replaced as needed; Remove the battery if the clock is not used or
stored for long periods of time.
Danger of explosion if battery is put into fire
Replace only with the same or equivalent type
Exchange battery set every 12 month
Mounting or standing unit
Ensure by undermounting save mounting on kitchenshelf at min. distance of 80cm AWAY
from any washingtable !!! Use included mountingsheet for correct drilled holes.
To use radio as standing unit, use included standingfeets
