FUNCTION OVERVIEW
3
FRONT AND REAR
1. SPEAKER
2.
FUNCTION
switch
selects the function
RADIO, TAPE or CD/AUX
3.
VOLUME
control
adjusts volume level.
5. STEREO EARPHONE JACK
press once to skip to previous track, press &
hold to search backward.
6. CASSETTE:
press once to skip to next track, press & hold
to search forward.
7. AUX-IN JACK
8. USB PORT
BASS BOOST
switch
9. TUNING CONTROL
selects AM/FM stations.
10. BAND switch
selects AM/FM/FM STEREO band
PLAY:
starts playback
F.FWD/REW:
fast winds / rewinds the tape
STOP/EJECT:
stopps the tape and opens the
cassette compartment
PAUSE:
interrupts playback
11. >>/>>|
12. FOLDER/ +10
Select the ALBUM or skip the tracks in 10
multiple.
13. |<</<<
14. LCD Display
15. PLAY/ PAUSE, USB
Play or pause playback; Press and hold to
switch in CD mode or USB mode.
16. PLAY MODE
(Repeat mode, Random, Program)
17. STOP
stop playback/ erases a program.
18. TELESCOPIC ANTENNA
19. Battery compartment
20. ON/ OFF Switch
to switch ON or OFF the unit.
21. AC MAINS
inlet for power cord.
Whenever convenient, use the power supply if
you want to conserve battery life. Make sure you
remove the plug from the set and wall outlet
before inserting batteries.
Batteries (not included):
Open the battery compartment and insert eight
batteries, type MONO, R-20, UM-1 or D-cells,
(preferably Alkaline) with the correct polarity as
indicated by the „+“ and „-“ symbols inside the
compartment.
Batteries contain chemical substances, so they
should be disposed of properly.
Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or
cause the batteries to burst. Therefore:
�
Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same
type for the set.
�
When inserting new batteries, do not try to
mix old batteries with the new ones.
�
Remove the batteries if the set is not to be
used for a long time.
Using AC Power
1. Check if the power voltage, as shown on the
type plate located on the bottom of the set
corresponds to your local AC power supply. If
it does not, consult your dealer or service
centre.
2. Connect the power cord to the AC MAINS
inlet and the wall outlet. Slide the ON/OFF
switch to “ -- ” position.
3. To switch off completely, unplug the power
cord from the wall outlet.
Unplug the power cord from the wall outlet to
protect your set during heavy thunderstorms
.
4.
HSILGNE
