English - 5
Program Mode
1.
During the CD stop mode, press the PROGRAM
BUTTON once. The “PROGRAM” indicator and the
number of Program to be memorized starts from the
first program “
” will light up and blink continuously.
Press the CD SKIP/SEARCH
or SKIP/SEARCH
BUTTON to your
desired musical track, the LCD DISPLAY will show the appropriate track
number. Press the PROGRAM BUTTON to store this track in memory.
2.
Repeat above procedure until all desired tracks have been programmed.
A total of 20 tracks can be stored in memory.
Remarks :
Whenever CD SKIP/SEARCH FORWARD or
BACKWARD BUTTON is pressed, it will always show
the last programmed track first to recall your memory.
After complete programming, LCD DISPLAY will show
“PROGRAM_ _ _” and flash continuously.
3.
Press the CD PLAY/PAUSE BUTTON once to start the program playback
and the CD Play Indicator “
” will light up.
4.
To check the program you have stored after complete
programming, press the PROGRAM BUTTON once
during CD stop mode, then press the CD SKIP/SEARCH FORWARD
BUTTON once, the LCD DISPLAY will show the first programmed track
number. Repeat above procedure to read all the programmed memory.
5.
To cancel the programmed memory :
¾
During the CD stop mode, press the CD STOP BUTTON once.
OR
¾
Open the CD DOOR during the CD stop mode.
The Program Indicator will disappear from the LCD DISPLAY.
PLAYING MP3 DISC
Getting Started
Note: Should skipping of tracks occur during MP3 Disc playing try reduce
the volume.
When MP3 disc is playing, do not open the CD DOOR.
1.
Open the CD DOOR by pulling up the CD DOOR. Put a MP3 disc into the
CD compartment and close the CD DOOR. Set the FUNCTION SWITCH to
“CD” position.
Note : Ensure the CD DOOR is closed properly and locked in place.
