SOUNDMASTER RCD1770, Instruction Manual

Page: 23 / 94

RCD1770 / English Instruction Manual
10
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
Supply voltage, current AC 230V ~ 50Hz
Power consumption 16W
Battery supply DC
9V (6 x “C ” SIZE R14).
Output power 2 x 1W
Frequency range DAB 174.928-239.200 MHz FM 87.5-108 MHz
Supporting formats:
Disc format
ISO 9660, Joliet, Multisession, UDF, Enhanced Music CD, and
Mixed Mode CD.
MP3 bit rate 32-320 kbps and variable bit rate (128 kbps preferable)
MP3 sampling frequency 8-48 kHz (44.1 kHz preferable)
Total number of music files around 600; - Maximum album number: around 99
Supported formats WMA V4, V7, V8, V9 (L1, L2) decoding.
All trademarks used are owned by their respective owners.
Note:
The following formats are not supported:
*.AAC, *.DLF, *.PLS, MP3 PRO; - Non-session closed discs
IMPORTER
Wörlein GmbH Tel.: +49 9103 71 67 0
Gewerbestrasse 12 Fax.: +49 9103 71 67 12
D 90556 Cadolzburg Email: service@woerlein.com
Germany Web: www.woerlein.com
Technische Änderungen und Druckfehler vorbehalten
Copyright by Woerlein GmbH, 90556 Cadolzburg,
www.woerlein.com
Vervielfältigung nur mit ausdrücklicher Genehmigung der Woerlein GmbH
PROBLEM CAUSE / SOLUTION
No sound /
power

Volume not adjusted. Adjust the volume.

Mains cable not securely connected. Connect the mains cable properly.

Batteries dead/incorrectly inserted. Insert (fresh) batteries correctly.

CD contains non-audio/ Mp3/ wma files. Press button repeatedly to
skip to a CD or MP3 audio track, instead of the data file.

Ensure the current SOURCE is correctly selected.
CD display
does not
function
properly / No
reaction to
operation of
any of the
controls

Electrostatic discharge. Switch to standby mode and unplug the unit.
Reconnect after a few seconds.

No CD inserted. Insert a CD.

CD badly scratched or dirty. Replace or clean the CD, see Maintenance.

Laser lens steamed up. Wait until lens has cleared.

CD-R / CD-RW is blank or not finalized. Use a finalized CD-R / CD-RW or
a suitable CD Audio disc only.

Make sure the CD is not encoded with Copyright protection technologies,
as some do not conform to the Compact Disc standard.

Press SOURCE button switching to CD mode.
The CD skips
tracks

CD damaged or dirty. Replace or clean CD.

Program is active. Quit program mode.

A CD badly scratched or dirty may result in improper operation.