To turn on the system ‘on’, press the POWER button at the side of the cabinet and
set the volume to a low level.
Rotate the function knob(UKW/MW) for desired band, UKW or MW.
Rotate the TUNING control to the desired radio station.
Ajust the VOLUME control as desired.
When you have finished listening, press the POWER button again.
UKW - The UKW antenna is the rod at the top of the cabinet. If UKW reception is
unsatisfactory, try adjusting the rod at any direction till the reception is good.
MW - The MW bar antenna is inside the cabinet. If MW reception is unsatisfactory try
repositioning the cabinet slightly until the internal antenna is picking up the strongest
signal.
3
Setting the Time
1.
Adjust the Timer Adjust Control for the time.
）
2.
Tuning the Timer Adjust Control clockwise at the back panel of the unit to adjust
the time display.
）
3.
Release it until the correct time is display.
）
Setting the Alarm
1.
Adjust the Alarm ON/OFF switch to the ‘on’ position.
）
2.
Tuning the Alarm Adjust Control clockwise at the back panel of the unit.
）
3.
Release it when the desired wake-up time appears.
）
Battery Operation
Open the battery compartment cover at the back panel of the unit, insert 1pc 1.5V /AA
battery(not included) into the battery compartment with correct polarity. Then close
the battery compartment cover.
