TROUBLESHOOTING
Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
Do not open the set as there is a risk of electric shock.
If you are unable to remedy a problem by following these hints, consult your dealer or service center.
WARNING: Under no circumstance should you try to repair the set yourself, as this will invalidate the warranty.
--Problem
•
Solution
No sound/power
-
Volume not adjusted
•
Adjust the VOLUME
- Power cord not securely connected
•
Connect the AC power cord properly
- Batteries dead/incorrectly inserted
•
Insert (fresh) batteries correctly
Display does not function properly/
No reaction to operation of any of the controls
- Electrostatic discharge
•
Switch off and unplug the set. Reconnect after a
few seconds
Poor cassette sound quality
Dust and dirt on the heads,etc.
•
Clean deck parts etc., see maintenance
- Use of incompatible cassette types (METAL or
CHROME)
•
Only use NORMAL(IECI)for recording
Recording does not work
-Cassette tab(s)may be broken
•
Apply a piece of adhesive tape over the missing tab
space
No disc indication
-
No CD inserted
•
Insert a CD, CD-R or CD-RW
-
CD badly scratched or dirty
•
Replace/clean CD, see Maintenance
- Laser lens steamed up
•
Wait until lens has cleared
-CD-R is blank or the disc is not finalized
•
Use a finalized CD-R
CD playback does not work
-CD badly scratched/dirty
•
Replace/clean CD(see maintenance)
- Laser lens steamed up
•
Wait until lens has adjusted to room temperature
The CD skips tracks
-
CD damaged or dirty
•
Replace or clean CD
-
Program is active
•
Quit Program mode(s)
SPECIFICATION
Specifications:
Environmental information
We have done our best to redue the packaging and make it easy to separate into 3 materials: cardboard, paper pulp and
expandable polyethylene.
You set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging, dead batteries and old equipment.
