ENGLISH
ENG 2
PRECAUTIONS FOR USE
INSTALLATION
•
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
•
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAIN VOLTAGE AND BEFORE ALL
OTHER CONNECTIONS HAVE BEEN MADE.
•
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. CONNECT THE POWER CORD (37) TO AC OUTLET.
2. WHEN YOU FIRST PLUG THE UNIT INTO THE MAINS, THE UNIT WILL GO INTO STANDBY MODE.
3. CONNECT THE SPEAKER WIRE TO THE SPEAKER TERMINAL (34) LOCATED ON THE REAR SIDE OF THE
UNIT.
4. TURN ON THE POWER (7) AND SELECT “CD“ FUNCTION BY PRESSING “ FUNCTION “ BUTTON (10) . IF THE
LCD DISPLAY (2) IS ON WITH BACKLIGHTING, IT MEANS THE POWER SUPPLY IS NORMAL. NOW THE
SYSTEM IS READY TO PLAY THE MUSIC.
SETTING THE CLOCK
1. SET UNIT IN STANDBY MODE.
2. PRESS THE “TIMER/CLK-ADJ” BUTTON (4), THE DISPLAY Will SHOW “ 12H “ OR “ 24H “, THEN PRESS THE
PRE-UP
(27) OR PRE-DOWN
(13) BUTTON TO SELECT THE APPROPIATED HOUR FORMAT (12 HOUR
OR 24 HOUR). PRESS THE “TIMER/CLK-ADJ” BUTTON (4) TO CONFIRM.
3. PRESS
PRE-UP (27) OR PRE-DOWN
(13) BUTTON TO SET THE CORRECT HOUR.
4. PRESS THE SKIP DOWN
(12)
OR SKIP UP
(26)
BUTTON TO SET THE CORRECT MINUTES.
5. PRESS ”TIMER/CLK-ADJ” BUTTON (4)TO STORE THE CORRECT HOUR.
¾
THE PRE-SET TIME WILL BE RE-SET COMPLETELY IF DIS-CONNECTING THE MAIN POWER
SUPPLY. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR
CONVENIENCE USAGE.
LISTENING TO RADIO
MANUAL TUNING
1. PRESS FUNCTION BUTTON (10) TO SELECT “ TUNER “ MODE
2. PRESS “ STOP
/
BAND ” BUTTON (8) AND SELECT THE DESIRED BAND (MW (AM) OR FM).
3. TUNE TO THE REQUIRED STATION BY PRESSING THE “ SKIP / TUNING UP
(26) OR DOWN
(12)
BUTTON.
4. ADJUST VOLUME UP/DOWN CONTROLS (3) TO THE DESIRED VOLUME LEVEL.
AUTO TUNING
1. PRESS FUNCTION BUTTON (10) TO SELECT “ TUNER “ MODE
2. PRESS “ STOP
/
BAND ” BUTTON (8) AND SELECT THE DESIRED BAND (MW (AM) OR FM).
3. PRESS AND HOLD THE “ SKIP / TUNING UP
(26) OR DOWN
(12) BUTTON FOR 1-2 SECONDS AND
THEN RELEASE
4. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP UNTIL A RADIO STATION IS REACHED.
5. REPEAT STEP 3 & 4 UNTIL THE DESIRED RADIO STATION IS BEING REACHED.
6. ADJUST VOLUME UP/DOWN CONTROLS (3) TO THE DESIRED VOLUME LEVEL.
PRESET STATIONS
YOU CAN STORE UP TO TOTAL OF 40 RADIO STATIONS (30 FM,10AM) IN THE MEMORY.
1. SET TO “ TUNER “ MODE
2. TURN TO THE DESIRED RADIO STATION BY “ MANUAL” OR “AUTO” TUNING METHOD.
3. PRESS “ MEMORY ” BUTTON (9) TO ENABLE PROGRAM STATE.
4. PRESS “ PRE-UP
(27) OR PRE-DOWN (13) BUTTON TO SELECT THE DESIRED STATION MEMORY
FOR STORAGE.
5. PRESS “MEMORY ” BUTTON (9) AGAIN TO CONFIRM THE SETTING.
6. REPEAT STEP 2 TO 5 TO STORE OTHER STATIONS.
7. PRESS “ PRE-UP
(27) OR PRE-DOWN
(13) BUTTON TO SELECT THE PRESET STATIONS IN ORDER.
8. TO RETURN NORMAL TUNER MODE, LEAVE KEYS FREE.
¾
THE PRE-SET MEMORIES WILL BE CANCELLED COMPLETELY IF SWITCHING OFF THE MAIN POWER
BUTTON ON SYSTEM. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR
CONVENIENCE USAGE.
¾
THERE ARE 5 SECONDS FOR PROGRAM STATE, AFTER 5 SEC. THIS STATE WOULD RELEASE TO
NORMAL TUNER MODE AUTOMATICALLY.
¾
YOU CAN OVERWRITE A PRESENT STATION BY STORING ANOTHER FREQUENCY IN ITS PLACE.