ICD2020 / English Instruction Manual
20
SETTINGS
Scan settings
Choose FM at first, it will go to a specific station playing. Then press “
MENU
” on the radio to get
above table.
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio
(hiss) from weak stations. To change the scan settings to stop only at stations with good signal
strength, select “Yes” after choosing Strong station only.
Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-
to-noise ratio (hiss). To play weak stations in mono, select FM weak reception: Listen in mono
only and then YES.
BLUETOOTH
When you select the Bluetooth mode, the device is entering to
pairing and the BT icon at the bottom of the screen will flash.
Turn on your smartphone, tablet or other Bluetooth devices to
search for the device.
The Bluetooth pairing name is “ICD2020”.
When pairing is successful, the Bluetooth indicator will light up and
stop flashing.
To release BT pairing, turn off or unpair your smartphone, table or
other Bluetooth devices.
Press “
” on the radio or Remote Control to start or pause the playback. You can press “
”
or “
” on the radio or Remote Control to play the previous or next track.
