ENGLISH
ENG 2
1. PROJECTION UNIT
2. AM/FM BAND BUTTON
3. SNOOZE / SLEEP BUTTON
4. ON / OFF BUTTON
5. ALARM 1 RADIO/BUZZ
BUTTON
6. ALARM 2 RADIO/BUZZ
BUTTON
7. LINE IN JACK
8. RATING LABEL
9. RESET BUTTON
10. FOCUS ADJUSTMENT FOR
PROJECTION UNIT
11. PROJECTION TIME 180° FLIP
BUTTON
12. PROJECTION ON/OFF
BUTTON
13. TEMPERATURE SENSOR (IN
DOOR)
14. FM ANTENNA
15. AC POWER CORD
16. ALARM SET BUTTON
17. << / MONTH-DAY / °C/°F
BUTTON
18. >> / YEAR / DST BUTTON
19. MODE BUTTON
20. DISPLAY LIGHT AUTO OFF /
LOW / HIGH DIMMER
21. LCD DISPLAY
22. VOLUME KNOB
23. TUNING KNOB
24. BATTERY DOOR
25. SPEAKER
POWER CONNECTION
Plug the AC power cord to a household outlet AC source. This unit is equipped with a
battery back up system, it requires a 3V CR2032 flat lithium battery (not included). Insert
the battery in the battery compartment, making certain that the positive and negative (+
and -) battery terminals are attached to the corresponding terminals on the plate in the
battery compartment. If an AC power failure occurs; the clock and timer memory continue
running. When the AC power resumes, the clock switches back to AC again.
1. TIME AND CALENDAR SETTING
A. Setting Time and Calendar – Press mode set button (19) in normal mode and keep
depress over 2 seconds to enter time set mode, after enter the setting mode, press
mode set button (19) to change the mode cycle as follows :
Normal
→
Year
→
Month
→
Day
→
12/24 H
→
RTC Hour
→
RTC Min
→
Normal
LOCATION OF CONTROLS