DISC4020 / English Manual
ENG 3
Playing Compact Disc
z
Getting start
1. Press Function button (13) to select “ CD ” mode.
2. Push the CD door open (4) to open the CD door.
3. Place a CD with the printed side facing out and then close the CD.
4. Focus search will performing and the LCD display (1) will show the total number of tracks & total playing time. Then, the unit
will start to automatically.
5. Press Volume knob (11) to the desired volume level.
z
Play / Pause mode
1. To interrupt, press the “ Play/Pause
” button (10) once, and the playing time will be freeze on the LCD display (1). Press
again to resume normal playback.
z
Stop mode
1. If “ Stop
” button (9) is pressed during play or pause mode, system will go to stop mode.
z
Skip mode (skip up
/ skip down
)
1. During play or pause mode, if “ skip up
” button (16) is pressed. It will go to next track and display the track no. and then
remain the play or pause mode.
2. During play or pause mode, if “ skip down
” button (16) is pressed. It will go to the previous track, original track no. is
display and remain the play or pause mode.
z
For MP3 Disc
1. After focus search is performing, the total number of track and album will be shown on the LCD display (1). The unit will start
to plat directly.
2. Press “ Folder/ Pre-Up
(15) or Pre-Down ” at remote control to select the folder number.
3. Press “ Skip Up
or Skip Down
” button (16) to select the track number.
ID3/Display function (On remote control)
Press the “ ID3 “ button on the remote control repeatedly, the LCD display (1) show “ file -
… ”
during playback of MP3/WMA file,
the song file/album/song/artist name/clock time is being displayed in sequence . Press the “ ID3 ” button until display show the
running time to disable the function.
Remark:-
- In that case of no name or not supportive languages had been assigned for the track, LCD display will blank (1) when press the
ID3 button.
- No Title/Album name can be recognized if the input format on the Disc is not supporting by the system.
- The system support only English and Arabic number for ID3 function.
