SOUNDMASTER CD9110 Instruction Manual Download Page 2

                                                                                                                                   

 
                                                                                                                                                 

CD9110 / English Instruction Manual

 

 

 

ALKALINE BATTERY INSTALLATION 

Slide the OPEN switch to open the CD door, insert two AA batteries (not included) into the battery compartment. Be sure to 

observe the proper polarity (the “+” and ”-” signs) as indicated on the battery compartment. 

                                                     

                   

Note: 

When replacing alkaline batteries, use two new batteries of the same type. Do not mix a used battery with a new one or 

mix different types of batteries. 

When inserting the batteries, incorrectly inserting even one with improper polarity will cause leakage. 

Never charge, heat, disassemble, or throw batteries into a fire. 

Old  or  discharged  batteries  must  be  recycled  or  disposed  of  properly  in  compliance  with  all  applicable  laws.  For  detailed 

information, contact your local solid waste authority. 

If  the  display  is  blank  (no  numbers  show  when  the  PLAY/PAUSE  button  is  pressed),  the  batteries  are  dead.  Replace  them   

(also ensure you insert the batteries according to the “+” and “-” as shown inside the battery compartment). 

 

CD Disc Operation 

Warning

: To protect    your hearing if you are using headphones or earphones, set VOLUME to its lowest setting before you 

play a CD 

1.)

 

Power is on by pressing PLAY ► button 

2.)

 

Slide the OPEN button and open the lid 

3.)

 

Place the CD firmly “with the label side facing up” on the pivot and close the CD Door. 

4.)

 

Press PLAY► button to start CD 

5.)

 

Adjust the Volume with the Volume -/ button 

6.)

 

Press the PLAY/PAUSE button to pause the playing audio file. 

7.)

 

Press the STOP

  button to stop the playback 

8.)

 

Skip/Search Button – Press once to kip to next track

or back to previous 

track 

a.

 

Press Continuously to search forward

  or 

backward 

9.)

 

Power is off by pressing the STOP 

  button twice 

 

Directory Search Function (for MP3 CD) 

This feature allows you to skip to different directories on your MP3 disc. It makes file searching easier and faster. 

While  playing  an  MP3  CD,  press  the  ESP/DIR  button  once.  The  display  will  shown  the  next  directory  file.

 

 

 

Repeat One/All-Track/Album/Random/Intro by pressing MODE button 

Press once: Repeat current track                  Press three times (MP3 four times): Random Play 

Press twice: Repeat all tracks                        Press four times (MP3 five times):    Intro Play (10 seconds each song) 

Press three times: Repeat Album (for MP3 CD only) 

Reviews: