SOUNDMASTER BCD 250, Introduction Manual

Page: 11 / 32

ENGLISH
10
RADIO OPERATION
1. Press the STAND BY Button to switch Power on.
2. Press the FUNCTION/C.ADJ Button to the RADIO Function.
3. How to use the buttons for radio
i. Manual Tuning
Press the ►│ or │◄ to search for desired frequency. Higher frequency can be selected by
pressing the ►│ button while Lower frequency can be selected by pressing the │◄ button
ii. Automatic Tuning
i) Press and hold the ►│ or │◄ button until the display frequency starts run.
ii) When a station of sufficient strength has been found Tuning will stop or you can stop the
automatic tuning by pressing
►│ or │◄ button.
To switch off the radio, Press the STAND BY BUTTON.
PRESET TUNING
1. Select your desired station according to the normal tuning procedure.
2. Press the PROG/MEM button, “P-01” will appear and flash in the LCD, Then use M+ or M- BUTTON to change
the number where the station will be stored. (P01 to P10)
3. Store the current frequency by pressing PROG/MEM again when you get the desired number.
4. Repeat the same procedure to set other desired frequencies into Memory No.1 to NO.10
The unit can be preset up to 10 stations.
MEMORY RECALL
Recall the stored frequencies by pressing M+ or M- BUTTON select 1 to 10 stations as desired
NOTE: As stored frequencies can only be stored for long time with the power supplying. The station you stored will
be lost and can not be recalled in case that you cut off the power.
PLAYING A COMPACT DISC (CD)
NOTE:
Never touch the laser lens inside of the CD compartment. Clean the laser lens with a CD cleaner disc if it
becomes dirty.
1. Press the STAND BY Button to turn on the unit.
2. Press the Function/C.ADJ Button to CD function.
3. Open the CD door and insert a CD into the tray with printed label side facing up.
4. Close the CD DOOR and the disc will rotate for a few seconds and then stop.
5. Press the PLAY/PAUSE/M- BUTTON to start play
6. Press the PLAY/PAUSE/M- BUTTON again to PAUSE play.
7. Press the PLAY/PAUSE/M- BUTTON to resume play again.
8. Press the STOP/M+ BUTTON to STOP play.
RANDOM PLAY
In CD stop mode, Press the ALARM/RAND BUTTON once, “RAND” will appear on LCD Display. Press
PLAY/PAUSE/M- BUTTON, this will enable random tracks play.
To stop RANDOM play, press ALARM/RAND Button twice, and the “RAND” will disappear on the LCD Display.