SoundMAGIC E10BT, User Manual

Page: 7 / 75

Volume Control
Press the ‘Volume +’ to increase the volume.
Press the ‘Volume -’ to decrease the volume.
Charging port
Audio Control
Press the ‘multifunction’ button to pause playback. Press the ‘multifunction’
button again to resume audio playback.
Press and hold the ‘Volume +’ button to skip to the next track.
Press and hold the ‘Volume -’ button to go back to the previous track.
Automatic Power Off
If Bluetooth is turned on, and there is no successful connection within 10
minutes, Bluetooth will automatically power off.
Charging
The E10BT uses a lithium-ion polymer battery. Please fully charge the battery
prior to first-time use.
1. Please use a computer or USB charger with 5V±0.2V output voltage to charge
the Bluetooth module, along with the provided USB cable .
2. A red light indicates that the unit is charging.
3. Charge time is approximately 2 hours. The red indicator light will go out once
the unit is fully charged.
4. Press ‘Volume +’ and ‘ Volume -’ at the same time to hear an audio broadcast
of the remaining battery power.
Battery Warnings
When battery power is low, you will hear a warning
tone every 4 seconds, a red indicator light will also
be flashing. These warnings will start when there is
3-5 minutes of power left. The device can be charged
anytime. If the battery is completely depleted, please
charge the unit as soon as possible in order to
maintain proper battery life.
07