
Play music through “Auxiliary” mode
Turn ON the speaker.
Insert one end of the Auxiliary cable (included) into the Auxiliary port, and the other end to the
audio device (such as phone / MP3 Player / computer / tablet / …..etc.).
Select your favourite song at the source device to play.
Long press + to increase the volume or - to decrease the volume.
Note:
Play, Pause, Skip Forward, Skip Backward etc can only be controlled through the source devices,
while playing music in Auxiliary mode.
Multi-colored LED Lights
Turn ON the speaker.
Short press the LED Light Button each time to change the LED Light color pattern:
Color changing -> Red -> Green -> Blue -> Cyan -> Purple -> Pale Blue -> Light Yellow White ->
Flash color changing -> off (but it is Dynamic LED Light with playing music) -> off
Short press the button twice to warm light, and then short press once to increase the light
brightness (low -> medium -> high -> off)
Tips!!
When the speaker is not in use, turn it OFF in order to save the battery power.
Specifications –
Bluetooth® Version: 4.2
Wireless Streaming Range Distance: 26-33 Feet
Speaker output: 3W
Size: 3-1/8” (L) x 3-1/8” (D) x 3-1/8” (H)
Weight: 6.8 Oz approx.
Power Input: DC 5V
Charging Time: about 2 - 3 hours
Play time (with either LED Light pattern on): up to 1 hour (max. volume)
Built-In Rechargeable Battery: 3.7V / 500mAh
Micro SD (TF) Card/USB Drive: Supports up to 32GB
(Note: Battery life & charging time may vary based on usage, types of devices connected & wireless
distance.)
Troubleshooting
Problem
Possible Cause
Solution
Low sound level
Source (Tablet, Mobile Phone, Laptop,
etc.) volume too low.
Battery dead
Adjust source volume.
Charge Battery.
Sound distorted
Battery nearly dead
Charge Battery.
No sound at all.
Source (Tablet, Mobile Phone,
Laptop.) turned off.
Speaker turned off.
Turn the source on.
Turn the speaker on.
5