6
Alarm Operation
The unit provides two alarms setting: AL1 and AL2. You can choose to use them
independently or simultaneously:
SETTING THE ALARM(S)
1. Press and hold POWER/FUNCTION button to turn off the unit.
2. Press and hold the /AL1 (or VOLUME -/AL2) button until the hour
digits blinks. The alarm 1 (or alarm 2) indicator will light depending on which
alarm is chosen.
3. When the hour digits blinks, press the
or
button to adjust your
desired hour.
4. Press the /AL1 (or VOLUME -/AL2) button to save the hour setting,
the minute digits will blink.
5. When the minute digits blink, press the
or
button to adjust your
desired minute value.
6. Press the /AL1 (or VOLUME -/AL2) button to save the minute
setting.
7. Press
/
to select wakeup mode for buzzer (showing “b”) or radio
(showing “F”). Press the /AL1 (or VOLUME -/AL2) button to save.
8. Then press
/
to adjust the volume level. Press the /AL1
(or VOLUME -/AL2) button to save.
SNOOZE FUNCTION
When the alarm goes off, press the SNOOZE/SLEEP/DIMMER button once. The
alarm will stop and resume after 9 minutes.
TURNING THE ALARM ON/OFF
When the alarm goes off, press and hold POWER/FUNCTION button to put the unit in
STANDBY mode.
Press the /AL1 (or VOLUME -/AL2) to deactivate the alarm. The previous
presets will be cancelled and you can follow the alarm setting steps to reset the alarm.
Play music using “AUX-IN” Port
This unit comes with an auxiliary input port to connect your cell phone or MP3 player,
etc.
1. Insert the Auxiliary cable (included) in the AUX-IN Port at the rear of the unit
and the other end of the cable into the Line-out jack or phone jack of your
audio device.
2. Press the POWER/FUNCTION button repeatedly until
“AU”
appears on the
display, the unit will turn to AUX IN mode.
3. Activate your external device.
4. During playback:
Press the /AL1 button to increase the volume.
Press the VOLUME -/AL2 button to decrease the volume.
