GET STARTED
START -
Before turning on your new amplifier, first make all connections. Ensure that
the volume on your pre-amplifier or playback device is set to a minimum.
PLAY -
Turn on the amplifier. Slowly increase the volume while playing some
music.
ENJOY!
CONNECTION -
The HY252-4CH has four sets of speaker connections. Connect the
speaker terminals marked “+” and “-” to the corresponding “+” and “-“ terminals of your
designated speaker. Repeat the same for the other speaker terminals and corresponding
speaker.
This amplifier will work with both balanced and unbalanced inputs.
For single-ended sources you can use a RCA to XLR cable or converter plug. The cable or
converter should short signal ground (XLR pin 1) with negative signal input (XLR pin 3).
H Y 2 5 2 - 4 C H | P a g e 1 0
