background image

3

INTRODUCTION

Dear Customer,

Congratulations on acquiring your Soundigital! You've just purchased a product of 
high  quality  and  technology.  The  Soundigital  products  are  developed  to  assure 
maximum efficiency and reliability to your sound system.

 Class D amplifiers:

The  main  characteristics  of  Class  D  amplifiers  are  audio  quality,  efficiency, 
versatility and compact design. Here are the advantages of these characteristics:

Audio Quality 

– Class D amplifiers used to have a limited response in the past and 

they used to have a worse performance regarding higher frequencies thanClass 
AB amps, despite being more efficient. Introducing new technologies, Soundigital 
developed  a  Class  D  amplifier  superior  to  the  Class  AB  ones  in  efficiency  and 
performance.

Efficiency 

-  The  Soundigital  Class  D  amplifiers  have  a  total  efficiency  (power 

 output) higher than 70%, assuring a battery consumption and a heating 
lower than the expected.

Versatility  of  uses 

–The  flat  response  of  all  the  frequencies  of  Soundigital 

amplifiers allows them to be used in all the kinds of systems: SPL, Sound Quality, 
Trio Eletrico and Pancadao, meeting the needs with extreme quality.

Compact design 

– The high efficiency and technology allow our amplifiers to be 

really compact, making it easy to install them in vehicles where you have limited 
space.

IMPORTANT INFO

Read this manual and follow its instructions and information carefully. It contains 
extremely important information to have your amplifier working properly. If you feel 
the need to contact our Tech Support, you can reach o u r  t e c h n i c i a n  s t h r o u 
g h  t h e  e - m a i l  [email protected].

PACKAGE CONTENTS

- 1 

EVO4.0 

Amplifier

- 1 Installation quick guide with warranty card

- 1 Promotional sticker

Summary of Contents for 1200.1 EVO 4.0
















Reviews: