SAFETY INSTRUCTIONS
To prevent injury to the user or damage to the amplifier, read all the safety
instructions contained in this manual;
If you feel insecure about installing the equipment, contact SounDigital technical
support or a qualified professional in automotive sound installation;
Before proceeding with the installation of any electrical equipment in the vehicle,
disconnect the negative (-) terminal of the battery to avoid fire, injury or damage to
the amplifier;
Use your sound system safely, continuous exposure to sound pressures above 85
decibels may cause irreversible hearing damage;
This equipment is for use with automotive batteries of DC voltage between 12.6 and
14.4 volts. Before installing the equipment, check the voltage of the batteries;
Do not install the amplifier in the engine compartment or in places exposed to
water, humidity, dust or dirt;
Install the amplifier in a ventilated place and prevent the side ventilation windows
from being obstructed;
Fix the amplifier in a proper and firm manner. Avoid the fixation on metallic parts, as
this procedure may cause ground "Looping" (noise);
Use rubber "O-rings" when passing the wires in metallic walls in order to prevent
them from being cut and causing short-circuit;
Make sure that the place chosen for installation of the amplifier does not hinder the
operation of the vehicle;
During the use of this product, the aluminum housing/dissipator may reach
temperatures higher than 60°C. Before touching the amplifier, be sure that it is cold;
To maintain the efficient thermal dissipation, periodically clean the dissipator,
removing dust and impurities with the help of a brush and/or dry cloth;
Be very careful when drilling holes in the vehicle, make sure not to pierce the fuel
tank, brake lines, electrical cables, etc;
Make sure that all cables are properly secured throughout the entire installation;
Wear gloves, safety goggles, and all necessary safety equipment during the
installation of the SounDigital amplifiers.
This symbol alerts the user to the presence of important instructions.
Failure to comply with these instructions may result in damage to the
amplifier or the user.
Cuidado!
4
