-4-
①
Power Connection Outlet
Connection to power adaptor for FingerVU 1016D.
②
USB Configuration Switch
When Hummin’ 3.03 is connected through the USB cable, its USB connection type needs
to be selected from the configurations listed below.
USB: Select when FingerVU 1016S/1016W Monitor is connected through USB
cable.
WUSB: Select when FingerVU 1016W Monitor is connected through the wireless
dongle. FingerVU 1016W Monitor can be used as a wireless device after
connecting FingerVU WUD Host Dongle and FingerVU Device Dongle to the
FingerVU WUD connector on FingerVU 1016D and FingerVU 1016W Monitor,
respectively, followed by the selection of this switch to WUSB.
Network to USB: This configuration will be used for future expansion of the USB
connection of FingerVU 1016D to a local network. SoundGraph, Inc. will soon
provide an additional accessory for this connection.
③
USB Connector
Connection between FingerVU 1016D Docking Station and Hummin’ 3.03 using the
enclosed USB cable.
DO NOT connect USB cable when FingerVU 1016W Wireless Monitor is
connected to Hummin’ 3.03 and FingerVU 1016D Docking Station is used
only for charging battery.
④
Audio Output Jack
Audio output jack to switch the audio output from the front speaker to headphones or
to a cable for external speakers.
Software Installation
There is no need for any installation of software for FingerVU 1016D Docking Station. However,
applications and USB driver must be installed for use of FingerVU 1016S/1016W Monitor. The
driver and applications are provided on the CD inside the package. Please refer to Quick Guide
and Software User Guide in FingerVU 1016S/1016W product.
Hardware Installation
This section provides detailed installation procedure of FingerVU 1016D Docking Station. Please
follow the description of each step carefully.
1.
Check the USB Configuration Switch