SoundFreaq SFQ-08, User Manual

Page: 13 / 21

13
Playing back from Macbook or
Macbook Pro
1. In the desktop screen, select the Open
Bluetooth Preference .
2. If there are any old Sound Rise records,
remove them. Click the Continue button
to continue pairing process.
3. Once completed, the pairing success
screen will come out.
Note:
y
Don’t quit the page immediately. You
may notice that the previous dialog
screen still shows the device not
connected. Just ignore it. It’s confusing
to the user. In fact, it’s connected
already.
4. Open iTune, play a song. Then use the
mouse to click the Bluetooth icon at the
top right hand corner of the desktop
screen, select the
Sound Rise option
and then select the Use as Audio
Device (Stereo) . After a while (a few
seconds), the music will come out from
the system. If not, select the
Use as
Audio Device (Stereo) once again. The
Sound Quality should be good.
Playing back from PC/Notebook
1. Press Start button to open the Device
and Printers dialog box.
2. Turn on the system, then press PAIR
button to put it into the pairing mode.
3. Select the Add a device in the Device
and Printer dialog box. The Sound Rise
icon will appear on the display.
4. Double click the Sound Rise icon and
wait until the device has been added
successfully.
5. Click Close button to close the Device
and Printer dialog box. A Sound Rise
icon appears in the dialog box.
6. Double click the Sound Rise icon and
the device connection screen will be
shown.
7. Click Connect button in the Music and
Audio option.
8. Once connected, the icon on the
display of the system will be solid on and
the connection success screen will be
shown.