Page 8
1
2
Advanced Features
Pro
Tracker incorporates additional features to give versatilty as a mixer
in live recording applications, while still providing a clean direct to tape
signal.
MIX TO 7/8
1
When the MIX TO 7/8 switch is pressed, the stereo mix output is
fed to channels 7 & 8 pre-insert (if switched to INPUT) to replace
the normal channel source. This allows a mix to be fed to tape
from tape sends 7/8, while still recording tracks direct from chan-
nels 1-6.
I/P TO MIX
2
When the I/P TO MIX switch is pressed, the post-filter channel sig-
nal bypasses the normal tape send/return loop and is fed to the
top of the fader, allowing inputs to be sent direct to the stereo mix.
The tape send is not interrupted, enabling recording of individual
sources as normal.
Note that when MIX to 7/8 is pressed it cuts off the feed from the
Tape Return to the mix bus on channels 7 & 8 to avoid internal
feedback.
EXPAND IN/OUT
9-way D-type Expansion connnectors are included on the rear
panel to allow a number of
Pro
Tracker units to be cascaded to
provide more than 8 inputs. Connection is simply made by
daisy-chaining the EXPAND OUT on one unit with the
EXPAND IN on the next unit.
The last unit in the chain provides a mix of all units and a sum
of all PFLs. Local submixes can still be taken from individual
Pro
Trackers if required.
The Limit Threshold is set by the local control on each unit.
