SoundCraft LIVE 8, User Manual

Page: 11 / 36

11
INTERNAL JUMPER SETTINGS
MONO INPUT CHANNELS
The Mono Input channels are provided with three selectable options, using push-on jumpers on the circuit board.
To change the settings, simply pull off the jumper and replace on the adjacent pair of pins. The default settings are shown as shaded
on the diagram below.
AUXILIARY PRE SOURCE
Default is POST-EQ, optionally Pre-EQ
DIRECT OUTPUT SOURCE
Default is POST-FADE, optionally Pre-fade
DIRECT OUTPUT PRE SOURCE
Default is POST-EQ, optionally pre-EQ
The diagram below shows the location of the jumpers on the circuit board, and with care can be changed without removing the circuit
board from the mixer.