SoundCraft FX16II, User Manual

Page: 21 / 48

21
When any SOLO or AFL switch is pressed, the L & R meters automatically switch to show the selected PFL/AFL
signal on both meters, in mono.
16 MONITOR SOURCE SELECT
These switches allow a choice source for the Phones, Monitor outputs and meters. Normally the monitor
source is either MIX or SUB (or both, depending on which of the two right-hand switches is selected), but
pressing the 2TK switch swaps the monitoring to the 2 Track input. When the switch is released the normal
MIX/SUB selection is restored.
17 MONITOR CONTROL & OUTPUTS
This control sets the output level to the MONITOR LEFT & RIGHT outputs without affecting the level to the
meters.
18 HEADPHONES
This control sets the level of the monitor signal to the MONITOR PHONES output.
19 MONITOR PHONES
The MONITOR PHONES output appears on a 3-pole 1/4" jack, suitable for headphones with an impedance of
150 ohms or higher.