background image

The Outcast Junior uses a 12 volt Nickel Metal Hydride rechargeable battery for DC operation. Please review 

the following safety instructions before use. Please note that the battery must be charged prior to its initial use.

Ni-MH BATTERIES SAFETY INSTRUCTIONS

Misuse can result in the battery short circuiting, the insulator melting, and damage to the safety mechanisms,

leading to leakage, heat generation, or rupturing.

Please observe the following precautions when using the battery.

 

Do not dispose in fire or expose to high temperature.

 

Do not under any circumstances insert the battery with the positive and negative poles reversed.

 

If the connection with the charger does not operate correctly, do not force the battery in, but instead

 

check the direction of the positive and negative poles.

 

Do not directly connect the battery to power outlets or 12 volt automotive ports.

 

Do not connect the positive terminal with the negative terminal with metals such as wire, etc. Also,

 

do not store or carry the battery with metal necklaces, etc.

 

Do not disassemble or modify the battery.

 

Do not directly solder the battery.

 

In charging, use only the charger provided with the unit.

 

The battery is constructed to release internal gases. For this reason, do not alter the (+) terminal.

 

The battery contains an alkaline liquid. If this liquid comes in contact with the eyes, this may lead

 

to loss of sight. Without rubbing the eyes, immediately flush them with clean water and consult a 

 

doctor.

 

Do not use the battery if it shows signs of any leakage, a change of color or shape, or any other 

 

changes in appearance.

 

Do not wet the battery or place it in water or sea water. This may lead to the battery generating

 

heat or rusting.

 

Do not remove or damage the coating tube. This makes it easy for the battery to short-circuit and

 

may cause leakage or heat generation.

 

Store the battery out of reach of small children.

 

If the battery is rusted, generating heat, or shows any other abnormal signs at the time of purchase,

 

take it to the point of purchase without using it.

 

When not using the battery, or not using the unit for a prolonged period, remove the battery from

 

the unit and store it in a dry place between the temperatures of -20 degrees C (-4 degrees F) and 

 

+35 degrees C (95 degrees F). This prevents leakage, rust, and decreased battery performance

 

and service life. 

 

Do not apply a strong force to the battery or throw it. This may cause leakage or heat generation.

 

Do not place the battery in direct sunlight, in hot cars, in front of stoves or other hot places. This 

 

may lead to leakage, and may deteriorate the performance and service life of the battery.

Should you have any additional questions concerning the installation or use of your Soundcast Products,

please contact Soundcast via E-mail at:    

[email protected]

3

Summary of Contents for OutCast Jr.











Reviews: