Soundavo M66-EXT, Owner'S Manual

Page: 8 / 12

* Connection between WS66i and M66-EXT:
1. Make sure each unit is correctly addressed:
The WS66i unit set as “Master" (for Zone 1 ~ Zone 6)
First M66-EXT unit set as "SLAVE 1” (for Zone 7 ~ Zone 12)
Second M66-EXT unit set as “SLAVE 2" (for Zone 13 ~ Zone 14)
2. Use the provided ribbon cables to connect the OUTPUT of the original
WS66i MASTER unit into the INPUT of SLAVE1
3. To cascade the source into a third unit, using the provided expansion
ribbon cable, go out of the OUTPUT port from the device addressed as
SLAVE 1 into the INPUT port of the device addressed as of SLAVE 2
and network.
8
6
6