background image

The packaging (cartons and foams) has been 

designed to effectively protect your SOUNDA-

VO electronics during transport and shipping. 

We invite you to keep them for future use. 

Protect the environment: if you want to get rid 

of the packaging, note that it is recyclable. We 

invite you to make the arrangements for the 

best respect of the environment according to 

the possibilities which are offered to you 

(sorting for example). At the end of his life, this 

device should not be thrown into a convention-

al trash bin. It must be returned to a recycling 

center for electronic equipment. This symbol 

on the product indicates that it is designed to 

be recycled according to a particular process. 

You will make a very significant contribution to 

the preservation of the environment. This 

device complies with the RoHS European 

directive. This means that it does not release 

polluting substances during recycling (Lead, 

Mercury, Cadmium, Hexavalent Chromium, 

Polybrominated biphenyls, Polybrominated 

diphenyl ethers).

Precautions for proper use 

This product was designed according to 

rigorous norms and complies with safety 

standards. It should only be used under normal 

conditions as described below. Verify the 

electrical voltage before connecting it to a 

power source. This electronic device was 

designed to work in numerous countries. We 

advise you to hook it up completely before 

connecting it to the AC power source. Take 

care when unplugging the power cord. When 

you unplug the power cord from the power 

source, do so by pulling on the head of the 

plug rather than on the cable. If you do not 

expect to use this device for a prolonged 

period of time, you are advised to unplug it 

from the power source. Do not open the case. 

This device contains no parts that can be 

exchanged by the user. Accessing the inside of 

this device’s case can lead to electric shock. 

Any modification to the product will nullify the 

guarantee. If a foreign object or liquid falls into 

the case, contact your retailer to arrange for a 

technician to remove it from the device safely.

Soundavo platinum is designed and manufac-

tured to the highest quality standards. If there 

is a defect in your Soundavo product, 

Soundavo customer service or an authorized 

dealer may take care of the repair within the 

limits of this warranty.

The warranty is 2 years from the date of 

purchase from an authorized dealer.

Definition of Warranty The warranty is limited 

to the repair of Soundavo equipment. Under no 

circumstances is the transport, the associated 

costs and the installation covered by the 

guarantee.

The warranty is only applicable to the first 

owner and is not transferable.

The guarantee does not apply in the following 

cases:

- The damage is caused by incorrect installa-

tion or connection.

- The damage is caused by improper use, 

other than that described in this manual, by 

negligence, or modification of the product by a 

person not authorized by Soundavo.

- Damage caused by accidents, lightning, 

water, fire, excessive heat or any other cause 

that can not be controlled by Soundavo.

- In the case of repair by unauthorized 

personnel. This warranty supplements the 

legal warranties in force in the country of the 

authorized dealer.

How to repair a product under warranty Simply 

contact your authorized dealer. To ensure 

transport in good conditions, always use the 

original packaging. If you use a product in a 

country other than where you bought it, contact 

the importer in your country of residence who 

will refer you to an authorized service center.

The list of authorized distributors is available on the website:

http://www.soundavo.com To validate your warranty, you must produce as proof of purchase the 

original of your invoice containing the date of your purchase and the stamp of your dealer.

WARNING  

WARRANTY 

8

Summary of Contents for HPS-6-BL-V









Reviews: